Integra DTR-6.4/5.4 - Manual (Page 35)

35
Selecting the appropriate setting for your connection
-- / ---
1 2 3
4 5 6
+10 0
7 8 9
Audio Sel Muting
Angle Subtitle TV / VCR
Random Audio Adjust
Enter
Search
Input Selector
Dimmer Zone 2 Display
SURR THX
Stereo Direct
All ST
VOL C H
Disc
Pure A
Rec
DSP DSP Re-EQ
Level
A M
V 1
DVD
V 3 V 4 V 5
C D
V 2
P H
TAP TUN
RC-534M
Setup
Return
/ / /
Return Setup
TAP
/ / /
ENTER
Tape
Input source buttons
Input Selector
buttons
3. Use the and cursor buttons to select “5. Input
Setup” and then press the Enter button.
The “Input Setup” menu appears.
4. Use the and cursor buttons to select an item and
then use the and cursor buttons to set the
desired value.
5. Press the Return button to return to the main menu.
Press the Setup button on the front panel or Setup button on the
remote controller to exit the Setup menu.
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
5.Input Setup
****Input:DVD *******
a.Digital Input :OPT1
b.Component Video
:Input1
c.IntelliVolume
: 0dB
Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
5.Input Setup
****Input:DVD *******
a.Digital Input :OPT1
b.Component Video
:Input1
c.IntelliVolume
: 0dB
Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
5.Input Setup
****Input:DVD *******
h.12V Trigger A :On
i.12V Trigger B :Off
Quit:|SETUP|
If you connected an MD recorder to the TAPE jacks of the DTR-
6.4/5.4, you can have “MD” appear when the Tape source button is
pressed. By changing the display, when an Onkyo MD recorder is
-connected, the system functions will become enabled.
Changing the display:
Press and hold down the Tape source button until the display
changes from TAPE to MD (approx. 3 seconds).
To return the display to its original setting, perform the same
procedure. This setting is necessary to allow
system
functions for a connected Onkyo cassette tape or MD recorder.
To change the display of the input source from
TAPE to MD
TAP
DTR-6.4/5.4 Remote controller