Invacare 9000 Topaz - Manual (Page 31)

5 FRONT RIGGINGS
Part No 1100869 31 Invacare®9000 Topaz™Wheelchair
5 Front Riggings
5.1 Installing/Removing Swingaway Footrest Assembly
Installing
1. Turn the swingaway footrest assembly to the side (open footplate
is perpendicular to wheelchair).
2. Install the hinge plates on the swingaway footrest assembly onto the
hinge pins on the wheelchair frame.
3. Push the swingaway footrest assembly toward the inside of the
wheelchair until it locks into place.
4. Repeat STEPS 1-3 for the other footrest assembly.
Removing
1. Push the footrest release lever inward.
2. Rotate swingaway footrest assembly outward.
3. Lift the swingaway footrest assembly off the hinge pins.
4. Repeat STEPS 1-3 for the other side.
FIGURE 1 Installing/Removing Swingaway Footrest Assembly
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
 The footplate will be on the inside of the
wheelchair when locked in place.
Footrest Release
Lever
Hinge
Pins
Swingaway
Footrest
Assembly
Hinge
Plates
Footplate