2 installing seat positioning strap, Back upholstery, Figure 2 installing seat positioning strap – Invacare 9000 Topaz User Manual
Page 53: 11 options
11 OPTIONS
53
Invacare®9000 Topaz™Wheelchair
11.2 Installing Seat Positioning Strap
1.
Remove the two existing back upholstery mounting screws and
washer located second up from the bottom of both back canes.
Discard back upholstery screws and washers.
2.
Position the seat positioning strap around the outside of the back
upholstery and back canes.
3.
Secure the seat positioning strap and back upholstery to the back
canes with the two new back upholstery mounting screws and
washers. Securely tighten.
FIGURE 2 Installing Seat Positioning Strap
The seat positioning strap may be installed with
the locking/releasing buckle on the right or left
side of the wheelchair back according to user
preference.
Back
Upholstery
Mounting
Screw
Washer
Seat
Positioning
Strap
Locking/Releasing
Buckle
Back Cane