9 front casters, Warning, Remove the dust cover – Invacare 9000 Topaz User Manual
Page 45: Slide in the new front caster and fork, Reassemble by reversing steps 1-2, Repeat steps 1-5 for the opposite front caster
9 FRONT CASTERS
45
Invacare®9000 Topaz™Wheelchair
9 Front Casters
9.1
Installing/Replacing Six or Eight-inch Front Casters and Forks
1.
Remove the dust cover.
2.
Remove the locknut and washer that secures the fork to the caster headtube.
3.
Drop the front caster and fork out of the caster headtube.
4.
Slide in the new front caster and fork.
5.
Reassemble by reversing STEPS 1-2.
6.
Repeat STEPS 1-5 for the opposite front caster.
ƽ
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
ƽ
WARNING
If converting from six-inch caster to an eight-inch caster or vice versa, there are seat-to-floor height adjustments that must
be made. Therefore, this procedure MUST be performed by a qualified technician.
For this procedure, refer to FIGURE 1 on page 46.
This procedure can be performed if replacing the exact same size front caster.