Invacare 9000 Topaz - Manual (Page 41)

7 SEAT AND BACK
Part No 1100869 41 Invacare®9000 Topaz™Wheelchair
7 Seat and Back
7.1 Replacing Seat Upholstery
1. Remove the mounting screws that secure the existing seat
upholstery to the wheelchair frame.
2. Remove the existing seat upholstery from the wheelchair frame.
3. Install new seat upholstery by reversing STEPS 1-2.
FIGURE 1 Replacing Seat Upholstery
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
 The seat upholstery MUST be installed with the
warning label facing up.
The following chart determines the number of
mounting screws for each seat depth
SEAT DEPTH NUMBER OF SCREWS
18 inch
20 inch 16
18
Mounting
Screws
Washers
Seat
Upholstery
Wheelchair
Frame
Warning Label