Invacare 9000 Topaz - Manual (Page 37)

6 ARMS
Part No 1100869 37 Invacare®9000 Topaz™Wheelchair
6 Arms
6.1 Adjusting Armrest Height
1. Unlock the armrest by performing the following:
A. Flip the height adjustment lever on the front of the armrest to the up (horizontal) position.
B. Pull the height adjustment lock knob on the rear of the armrest and twist
1
/
4
turn into the unlocked position.
2. Adjust armrest to one of five positions.
3. Lock the armrest by performing the following:
A. Flip the height adjustment lever on the front of the armrest to the down (vertical) position.
B. Pull the height adjustment lock knob on the rear of the armrest and twist
1
/
4
turn into the locked position.
4. Repeat STEPS 1-3 for other armrest.
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
ƽ
WARNING
Make sure the height adjustment lever is in the locked position before using the wheelchair.

For this procedure, refer to FIGURE 1 on page 38.

The height adjustment lever and lock knob MUST be in the unlocked position when placing armrest into the arm assembly.