10 one piece footboard height adjustment – Invacare 9000 Topaz User Manual
Page 65
11 OPTIONS
65
Invacare®9000 Topaz™Wheelchair
11.10 One Piece Footboard Height Adjustment
1.
Remove the footboard support assembly. Refer to Installing/Removing One-Piece Footboard on page 62.
2.
Remove the two bolts and locknuts that secure the lower footboard support tube to the upper footboard support.
3.
Reposition the lower footboard support tube to the desired height.
4.
Using the two bolts and locknuts, secure the lower footboard support tube to the upper footboard support. Securely tighten.
5.
Repeat STEPS 2-4 to adjust the remaining footboard support assembly.
6.
Reinstall the footboard support assembly. Refer to Installing/Removing One-Piece Footboard on page 62.
For this procedure, refer to FIGURE 10 on page 66.
Lay the assembly on a flat surface to simplify this procedure.
Ensure both footboard supports are adjusted to the same height.