JVC CA-MD70R - Manual (Page 15)

– 14 –
English
Tuning in a Preset Station
1
Press FM/AM.
The unit automatically turns on and tunes in the
previously tuned station (either FM or AM).
• Each time you press the button, the band alternates
between FM and AM.
2
Select a preset number.
On the unit:
Rotate MULTI JOG, or press < or > of the tuner
control buttons.
On the remote control:
Press
@ or # of the tuner control buttons.
• You can also use the number buttons. (Make sure that
you have pressed FM/AM on the remote control
before pressing the Number buttons.)
For preset number 5, press 5.
For preset number 15, press +10 then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
To erase a preset station
The following procedure is only possible on the unit.
1
Select a preset station number you want to erase.
2 Press CANCEL.
The preset number starts flashing in the main display.
3 Press SET.
“CANCEL” appears in the main display, and the
station frequency stored in the preset number is erased.
3
Select a preset number.
On the unit:
Rotate MULTI JOG, or press < or > of the tuner
control buttons.
On the remote control:
Press
@ or # of the tuner control buttons.
• You can also use the number buttons. (Make sure that
you have pressed FM/AM on the remote control
before pressing the Number buttons.)
For preset number 5, press 5.
For preset number 15, press +10 then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
4
Press SET again.
The tuned station in step 1 is stored in the preset
number selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
“MEMORY” does not appear if you
press SET on the remote control.
AM
FM
EN01-18.CA-MD70R[E] 98.10.18, 2:43 am 14