JVC CA-MD70R User Manual
Page 36
– 35 –
English
MOVE Function
This function allows you to move a track to the position
you prefer. It is useful to change the order of the tracks as
you like.
• To do the following procedures, use the buttons and
controls on the unit.
• To stop any time during editing process, press MD EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights.
2
Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE
function selected).
3
Rotate MULTI JOG until “MOVE” is selected.
4
Press SET.
5
Rotate MULTI JOG to select the track you want to
move.
6
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number again.
7
Rotate MULTI JOG to select the position where you
want to move the track.
Amplifier/tuner
MD recorder
MULTI JOG
Continued
ENTER
SET
CANCEL
MD EDIT
MD IN lamp
MD Loading slot
0
Ex.: When moving track 2
Ex.: When moving to the track 4 position
EN32-52.CA-MD70R[E]/F
98.11.6, 11:56 am
35