JVC CA-MD70R - Manual (Page 9)

– 8 –
English
Connecting Other Equipment
You can connect the following equipment to this unit:
• Cassette deck — used as a playback and recording
device.
• Audio equipment — used only as an analog playback
device.
• Audio equipment with an optical digital output terminal
— used only as a digital playback device.
When you connect and use these equipment, refer also to
the manuals supplied with them.
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
Continued
To connect a cassette deck
To input
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the TAPE OUT (REC) jacks.
• Between the audio output jacks on the cassette deck and
the TAPE IN (PLAY) jacks.
AM EXT
AM LOOP
FM 75 COAXIAL
GND
IN (PLAY)
OUT (REC)
DIGITAL IN
OPTICAL
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT RIGHT
Cassette deck
To output
To connect audio equipment without a digital output
terminal
Connect the audio output jacks on the other equipment and
the AUX jacks, using an audio cord (not supplied).
To output
AM EXT
AM LOOP
FM 75 COAXIAL
GND
IN (PLAY)
OUT (REC)
DIGITAL IN
OPTICAL
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT RIGHT
Audio equipment
without a digital output
EN01-18.CA-MD70R[E] 98.10.18, 2:43 am 8