JVC CA-MD70R - Manual (Page 44)

– 43 –
English
Using the Timers
There are three timers available — Recording Timer, Daily
Timer, and Sleep Timer.
Before using these timers, you need to set the clock built in
the unit. (See page 10.)
Using Recording Timer
With Recording Timer, you can make an MD of a radio
broadcast automatically.
• You can set Recording Timer whether the unit is turned
on or off.
• To correct a mis-entry any time during the setting
process, press CANCEL.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified
station, turns off the volume, and starts recording on the
MD recorder when the timer-on time comes. Then, when
the timer-off time comes, the unit automatically turns off
(stands by).
The timer settings remain stored in memory until you reset
them or disconnect the AC power cord.
1
Press CLOCK/TIMER repeatedly until “REC SET”
appears in the main display.
• Each time you press the button, the timer mode
changes as follows:
DAILY ON/OFF? REC ON/OFF?
REC SET
DAILY SET
Previous indication Clock
Amplifier/tuner
CLOCK/TIMER CANCEL SET MULTI JOG
2
Rotate MULTI JOG to set the hour of the timer-on
time, then press SET.
3
Rotate MULTI JOG to set the minute of the timer-
on time, then press SET.
4
Rotate MULTI JOG to set the hour of the timer-off
time, then press SET.
5
Rotate MULTI JOG to set the minute of the timer-
off time, then press SET.
6
Rotate MULTI JOG to select either “FM” or “AM,”
then press SET.
EN32-52.CA-MD70R[E]/F 98.11.6, 11:56 am 43