JVC CA-MD70R - Manual (Page 43)

– 42 –
English
2) Press the button for the next character you want
to input.
• If the next character you want to input is assigned
to the same button you have just pressed in step
6-
1) , press
Ø first to move the character entry
position to right.
7
Repeat steps 5 and 6 to input other characters.
• The main display can only show 8 characters at a
time. If you enter the 9th character, the first character
disappears, and so on.
8
Press ENTER twice to finish the title entry.
• If you want to cancel the editing, press MD TITLE
INPUT after pressing ENTER once in this step.
9
Press 0 on the unit to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
You can assign titles during play or recording
• During play: Entering a track title
The MD recorder repeats playback of the current
track until you press ENTER twice in step 8
above. When you press it twice, MD stops play.
Entering a disc title
The MD recorder repeats playback of all tracks
of the MD until you press ENTER twice in step 8
above. When you press it twice, MD stops play.
• During recording: Entering a track title
The MD recorder continues recording even after
you press ENTER twice in step 8 above. When
you press it twice, a track title is assigned to the
track where you have started the title entry.
Changing the Title
You can make a correction or change the title.
1
Follow steps 1 to 4 of page 41.
2
Press
ø or Ø to select the character you want to
correct.
• Make sure that the character you want to change is
flashing.
3
Press CANCEL to delete the character you have
selected in the above step.
4
Input the correct character by pressing one of the
text entry buttons.
5
Repeat steps 2 to 4 of the current procedure to
correct more characters.
6
Press ENTER twice to finish correcting the title.
• If you want to cancel the correction, press MD TITLE
INPUT after pressing ENTER once in this step.
7
Press
0 on the unit to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
To erase all the characters
Press CANCEL repeatedly in step 3 above to erase all the
characters, then go to step 6.
Available Characters
Capital letters Small letters Symbols
(Blank)
Numerals
Name!!
EN32-52.CA-MD70R[E]/F 98.11.6, 11:56 am 42