JVC CA-MD70R - Manual (Page 31)

– 30 –
English
To stop recording, press 7 of the MD control.
To stop recording temporarily, press REC PAUSE (or
MD REC PAUSE) again.
To resume recording, press MD
6 again.
To remove the MD, press
0.
Recording CDs
You have 3 methods to record from a CD onto an MD.
• Synchronized Recording — Records the entire CD or
the program you have made.
• First Track Recording — Records the first track of
each CD.
• Listening Edit Recording — Allows you to make a
program while listening to the CD.
Synchronized Recording
This is the easiest way of CD recording. Only by pressing
CD REC, you can start playing a CD and recording on an
MD.
1
Insert a recordable MD.
The MD IN lamp lights.
2
Prepare a CD.
• Place a CD on one of the disc tray (CD 1, CD 2, or
CD 3), press the corresponding Disc Number button
(CD 1, CD 2, or CD 3), then
7 of the CD control
before going to the next step. Make sure that the
correct Disc Number lamp lights on the unit.
• You can make a program if you want (see page 20).
3
Press CD REC on the unit.
The REC and DIGITAL lamps on the unit light.
To stop recording, press
7 (of either the CD control or the
MD control).
Continued
To record a single track while playing a CD
Press CD REC while playing back a CD track you want to
record.
The playback of that CD track is stopped, and the same
track starts playing from the beginning again. This time, the
MD recorder starts recording the CD track.
First Track Recording
First Track Recording allows you to record the first track of
each loaded CD. You can, for example, make a directory of
all your best CDs.
1
Prepare CDs, and a recordable MD.
• Always place a CD on the CD 1 tray. If not, this
function does not work.
2
Press 1ST TRACK REC.
The REC and DIGITAL lamps light, and First Track
Recording starts from the CD on the CD 1 tray.
When the first track of the CD on the CD 1 tray is
recorded, the first track of the CD on the CD 2 tray will
be recorded. Recording continues until the first track of
each loaded CD is recorded.
3
Replace the CDs on the trays whose disc number
lamp does not light green.
• You can change CDs to continue the First Track
Recording using more than 3 CDs.
When the first track of the last loaded CD is recorded, First
Track Recording stops.
To stop recording, press
7 (of either the CD control or the
MD control).
EN19-31.CA-MD70R[E]/F 98.11.6, 11:52 am 30