JVC SR-V10U - Manual (Page 12)

12
EN INITIAL SETTINGS (cont.)
5
Set date
Press SHUTTLE PLUS %fi until the desired date
appears, then press OK or SHUTTLE PLUS
#.
● Holding SHUTTLE PLUS %fi changes the date
in 15-day intervals.
6
Set year
Press SHUTTLE PLUS %fi until the desired year
appears, then press OK or SHUTTLE PLUS
# twice.
7
Select D.S.T. mode
You can select either “ON” or “OFF”.
ON–
Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
Press SHUTTLE PLUS %fi to select the desired
setting.
8 Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or SHUTTLE PLUS # repeatedly until the item
you want to change blinks, then press SHUTTLE PLUS
%fi.
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 02
AUTO CLOCK : ON
HOST CH
: AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
Setting clock manually
— Manual Clock Set
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
Press SHUTTLE PLUS
%fi until the desired
time appears, then press
OK or SHUTTLE PLUS
#.
● Holding SHUTTLE PLUS %fi changes the time
in 30-minute intervals.
● When the time is entered manually, “AUTO
CLOCK” is automatically set to “OFF”, and
“HOST CH” and “TIME ZONE” disappear.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
8 4 – 7
4 – 7