JVC SR-V10U - Manual (Page 48)

48
EN
Insert Editing
and AV Dubbing
This VCR (for recording)
To AUDIO/
VIDEO input
Connection
To Audio/
video output
Audio/video cable
(Supplied)
● Insert Editing and AV Dubbing are also possible
using the audio/video connectors on the rear panel.
Refer also to the other component’s instruction manual
for connection and its operations.
Insert Editing: You can replace a recorded scene with
new scene recorded on another tape or with other
material. Both the picture and the sound recorded on the
Hi-Fi sound track are replaced at the same time.
Audio/Video Dubbing: You can perform Audio Dubbing
and Insert Editing at the same time. This means that the
picture and the sounds recorded on the Hi-Fi sound
track and on the normal track are replaced at the same
time.
• For Audio/Video Dubbing, you can edit pictures and
sound using different sources; connect a video source
to the video input connector, and an audio source to
the audio input connectors.
EDITING (cont.)
VIDEO (MONO)L—AUDIO—R S VIDEO A.DUB
DIGITAL TBC/NR
FF REW
POWER
SP EP VCR REC PAUSE STOP/EJECT
PLAY
– +
CH– /+ PUSH / TURN
INSERT
24HR QUICK PROGRAM
REC LINK
Another VCR (for playback)
To
S VIDEO
input
To S-video
output
S-video
cable
(Supplied)
AV Dubbing
Insert Editing
Before
editing
After
editing
Before
editing
After
editing
Normal track
Video and Hi-Fi track
Source tape
Edited tape
Source tape
Edited tape