Timer recording, Corrective action, Symptom – JVC SR-V10U User Manual

Page 55: Possible cause

Advertising
background image

EN

55

CORRECTIVE ACTION

Set the clock and/or timer correctly.

Press TIMER and make sure that ‰
appears on the front display panel.
Re-perform the set-up procedures.
Make sure you have compensated for
guide channel and VCR or cable box
channel number mismatches
(

pg. 30).

Timer programing cannot be performed
when timer recording is in progress.
Wait until it finishes.

Load a cassette with the record safety
tab intact. If the tab is removed, set
"REC SAFETY" to "OFF". (

pg. 37,

41)
Set "REC SAFETY" to "OFF" (

pg.

37, 41) or replace the cassette with
one on which the safety tab is intact.

Check the programed data and set
again if necessary, then press TIMER
again.

The program may not have been
recorded in its entirety. Next time be
sure you have enough time on the
tape to record the entire broadcast.

Re-perform the Changing VCR Plus+
Setting procedure (

pg. 30).

Wait until a space in memory clears,
or cancel unnecessary program
information (

pg. 35).

SYMPTOM

1. Timer recording will not work.

2. Timer programing will not work.

3. ‰ and ] on the front display

panel will not stop blinking.

4. ‰ blinks for 10 seconds and the

timer mode is disengaged.

5. The power shuts off and ‰ and

]

will not stop blinking.

6. You moved, and now VCR Plus+

system does not work properly.

7. “PROGRAM FULL” is displayed on

the screen.

POSSIBLE CAUSE

● The clock and/or the timer have

been set incorrectly.

● The timer is not engaged.

● The VCR has not been set up properly.

● Timer recording is in progress.

● The timer is engaged but there is no

cassette loaded.

● "REC SAFETY" is set to "ON" and the

loaded cassette has had its record
safety tab removed.

TIMER has been pressed when there

are no programs in memory, or the
timer recording program has not
been set correctly.

● The tape reaches its end during

timer recording.

● The receivable stations in the new

area are received on different
channels than those in the previous
area.

● All 8 programs of the VCR’s timer

memory are used.

TIMER RECORDING

CONTINUED ON NEXT PAGE

\

Advertising