JVC SR-V10U - Manual (Page 18)

18
EN BASIC PLAYBACK AND RECORDING (cont.)
Locating beginning of timer
recordings
— Instant Review
At the press of a button, you can turn on the VCR,
rewind the tape and begin to view the most recent timer-
recorded program.
After ensuring that the VCR is turned off and that the
timer mode is disengaged, press REVIEW.
● The VCR turns on, and rewinds to the index code
indicating the beginning of the last timer-recorded
program, then begins playback automatically.
● You can access a program of 2 to 9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to watch
the third one, press REVIEW three times.
● If you want to find the very beginning of the desired program,
press REW ( 1 ) or FF ( ¡ ) after playback starts.
● If the tape is already rewound when REVIEW is
pressed, it will play the tape from the beginning. It will
not fast-forward to an index code.
● The Instant Review function will also operate if the
VCR is turned on.
Adjusting picture condition
— Digital TBC/NR
The Digital TBC/NR (Time Base Corrector / Noise
Reduction) function removes jitter from fluctuating video
signals to deliver a stable picture even with old tapes
and rental tapes. The Digital 3-DNR (Noise Reduction)
function which cuts noise and reproduces clear pictures
is also linked to this function.
We recommend that you use the Digital TBC/NR
function when...
— playing back a tape recorded on a camcorder.
— playing back a tape repeatedly used.
— using this VCR as the player for editing.
Press DIGITAL TBC/NR on the front panel so that the
DIGITAL TBC/NR lamp lights up.
Each time you press the button, this function turns on
and off.
NOTES:
● If you play back a tape recorded under poor TV reception
condition, the picture may happen to become more stable
with Digital TBC/NR activated.
● If you play back a tape on which certain types of signals
(using a PC or some character generators) have been recorded
with Digital TBC/NR activated, the playback picture may be
distorted. In this case, deactivate Digital TBC/NR.
● Digital TBC/NR and Video Stabilizer ( ੬ pg. 39) cannot be
used at the same time; if you turn on Digital TBC/NR when
“VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be
automatically turned “OFF”. Make sure Digital TBC/NR is
deactivated when you want to use Video Stabilizer.
H
Other Useful functions for playback
● Playback Resume Function
If there is a power outage during normal playback (or
Series Playback), the playback will resume automatically
when the power is restored to the VCR. (No setting is
required for this function.)
● Video Calibration (੬ pg. 38)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
● Picture Control (੬ pg. 38)
This function helps you to adjust the playback picture
quality according to your preference.
● Video Stabilizer (੬ pg. 39)
You can automatically correct vertical vibrations in the
picture when playing back unstable recordings made on
another VCR.
I
VIDEO (MONO)L—AUDIO—R S VIDEO
A.DUB
DIGITAL TBC/NR
FF REW
POWER
SP EP VCR REC PAUSE STOP/EJECT
PLAY
– +
CH– /+ PUSH / TURN
INSERT
24HR QUICK PROGRAM
REC LINK
I
FF ( ¡ )
1 2 3
4 5 6
7 8 9
0
2
4
1
3
H
REW (
1 )