JVC SR-V10U - Manual (Page 16)

16
EN
Basic
Playback
Features ● To display the VCR status including the tape remaining
time, the time counter and the clock time on the TV
screen, see “Showing on-screen display” (
੬ pg. 21).
● The approximate tape remaining time appears and the
" " indicator lights on the front display panel.
● The tape remaining time is calculated based on the
tape speed (SP or EP) being used. The indicated
remaining time is only an estimate.
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
Checking tape position
The tape position indicator
appears on screen in the
following cases:
● When you change the VCR
operation mode from the
stop mode to fast forward or
rewind mode.
● When you perform an Index
Search ( ੬ pg. 17) or Instant Review (੬ pg. 18).
The position of “ ” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.
NOTES:
● "ON SCREEN (PLAY)" must be set to “ON”, or the indicator
will not appear (
੬ pg. 37, 39).
● It may take a few seconds for the tape position indicator to be
displayed.
Playing back tape repeatedly
— Repeat Play
You can play back a tape repeatedly.
While playing back a tape, press and hold PLAY ( 3 )
for more than 5 seconds.
The play indicator (
# ) on the front display panel starts
flashing slowly, and a tape will be played back
repeatedly.
To stop playback, press STOP (
7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
● To select the returning point (recording end or tape
end), see "RETURN POINT" on page 41.
To prohibit operations during Repeat Play (Mode Lock)
Press and hold OK on the Remote for more than 5
seconds. " " and " " light up on the front display panel
(
੬ pg. 60). The entire recording or entire tape will be
played back repeatedly without any interruption.
To cancel Mode Lock, press and hold OK on the Remote
again for more than 5 seconds.
● When OK is pressed to set Mode Lock, the on-screen
display appears and the time counter remains on the
TV screen. If the time counter is not necessary, set "ON
SCREEN (PLAY)" to "OFF" (
੬ pg. 37, 39).
C
A
COUNT 0:33:27
B E + + +
B
Time Counter Tape Remaining Time
Clock Time
BASIC PLAYBACK AND RECORDING (cont.)
VIDEO (MONO)L—AUDIO—R S VIDEO A.DUB
DIGITAL TBC/NR
FF REW
POWER
SP EP VCR REC PAUSE STOP/EJECT
PLAY
– +
CH– /+ PUSH / TURN
INSERT
24HR QUICK PROGRAM
REC LINK
STOP/EJECT
( 7 / 0 )
– 2
1 2 3
4 5 6
7 8 9
0
2
4
1
3
A
A
C
F
– a, b, c
F
– a
F
– C
F
– b
E
D
STOP ( 7 )
C. RESET
– 1
D
G
Changing display information
Press DISPLAY during playback.
Each time you press the button, the front display panel
shows the time counter, tape remaining time and the
clock time in sequence.