JVC SR-V10U - Manual (Page 20)

20
EN
Basic
Recording
Features
A
B
Changing display information
Press DISPLAY during recording or recording pause.
Each time you press the button, the front display panel
shows the time counter, tape remaining time, channel
number and the clock time in sequence.
● To display the VCR status including the tape remaining
time, the time counter and the clock time on the TV
screen, see “Showing on-screen display” (
੬ pg. 21).
● The approximate tape remaining time appears and the
" " indicator lights on the front display panel.
● The tape remaining time is calculated based on the
tape speed (SP or EP) being used. The indicated
remaining time is only an estimate.
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
Recording on one tape
repeatedly
— Repeat Recording
You can record programs on one tape repeatedly.
While recording, press and hold PLAY (
3 ) and
REC␣ (␣ ¶␣ ) on the Remote or REC ( ¶ ) on the front panel
for more than 5 seconds.
The record indicator on the front display panel starts
flashing slowly.
To stop recording, press STOP (
7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
To prohibit operations during Repeat Recording
(Mode Lock)
Press and hold OK on the Remote for more than 5
seconds. " " and " " light up on the front display panel
(
੬ pg. 60). The recording will be performed repeatedly
without any interruption.
To cancel Mode Lock, press and hold OK on the Remote
again for more than 5 seconds.
● When OK is pressed to set Mode Lock, the on-screen
display appears and the time counter will be recorded
with your picture. If the time counter is not necessary,
set "ON SCREEN (REC)" to "OFF" (
੬ pg. 37, 39).
Time Counter Tape Remaining Time
Clock Time Channel No.
BASIC PLAYBACK AND RECORDING (cont.)
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its record safety tab. To record on it later, cover the
hole with adhesive tape, or set "REC SAFETY" to "OFF".
(
੬␣ pg. 37, 41)
Note: You can also record onto the cassette even when the
tab is removed. ( ੬ pg. 41)
VIDEO (MONO)L—AUDIO—R S VIDEO
A.DUB
DIGITAL TBC/NR
FF REW
POWER
SP EP VCR REC PAUSE STOP/EJECT
PLAY
– +
CH– /+ PUSH / TURN
INSERT
24HR QUICK PROGRAM
REC LINK
B
STOP/EJECT ( 7 / 0 )
1 2 3
4 5 6
7 8 9
0
2
4
1
3
A
D
C
– 1
C. RESET
STOP (
7 )
Record safety tab
B