Smart Technologies Smart Bridgit 4.5 - Manual (Page 34)

2. Clear the Enable Audio check box.
N
N O T E S
o Meeting audio is available in active meetings until they end.
o Meeting audio is disabled in new meetings.
g To select a default audio optimization when using VoIP
1. Double-click the SMART Bridgit Administration Tools shortcut on the server's desktop,
and then click the Audio tab.
2. Select Use VoIP Audio, and then select one of the following:
o Optimize for high audio quality provides the best quality meeting audio. It also
consumes the most bandwidth.
o Optimize for low bandwidth uses less bandwidth but doesn’t provide optimal audio
quality.
Third-party audio
If you're using a third-party voice bridge instead of VoIP, you can provide the telephone number and
meeting code to participants so they can join the meeting.
g To notify participants of a third-party voice bridge
1. Double-click the SMART Bridgit Administration Tools shortcut on the server's desktop,
and then click the Audio tab.
2. Select Use a third-party Voice Bridge or audio-conferencing provider.
C H A P T E R 3
Configuring the server software
30