Siemens GIGASET C475 IP - Manual (Page 109)

108
Handset settings
Setting the screen picture
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Setting the screen picture
You can display a picture or a screen picture (picture or digital clock) when the handset is
in idle status. This will replace the idle status display. It may conceal the date, time and
name.
The screen picture is not displayed in certain situations, e.g. during a call or when the hand-
set has been de-registered.
If a screen picture has been activated, the menu item
Screen Picture is marked with .
v
¢
Ð Settings
¢
Display
¢
Screen Picture
The current setting is displayed.
¤
Change multiple line input:
Activation:
Select On (screen picture is displayed) or Off (no screen picture).
Selection:
Change screen picture if necessary (see below).
¤
Press the display key §Save§ .
If the screen picture conceals the display, press the end call key a briefly to show the idle
display with time and date.
Changing the screen picture
v
¢
Ð Settings
¢
Display
¢
Screen Picture
s Scroll to the Selection line.
§View§ Press the display key. The active screen picture is displayed
s Select the logo and press the display key §Save§ .
¤
Press the display key §Save§ .
Setting the display backlight
Depending on whether or not the handset is in the charging cradle you can set different
levels of display illumination. If it is activated, the display is permanently dimmed.
v
¢
Ð Settings
¢
Display
¢
Backlight
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select On or Off .
Without Charger
Select On or Off .
§Save§ Press the display key.
a Press and hold (idle status).
Please note:
The handset's standby time can be significantly reduced if the display backlight ( On ) is activated.
‰