Siemens GIGASET C475 IP - Manual (Page 114)

113
Handset settings
Setting the alarm clock
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
¤
Change multiple line input:
Key Tones:
Select On or Off .
Confirm.:
Select On or Off .
Battery:
Select On , Off or In Call . The battery warning tone is only activated/deactivated and only
sounds during a call.
§Save§ Press the display key to save the setting.
You cannot deactivate the confirmation tone for placing the handset in the charging cra-
dle.
Setting the alarm clock
Precondition: The date and time have already been set (page 13).
Activating/deactivating the alarm clock and setting the wake-up time
v
¢
ì Alarm Clock
¤
Change multiple line input:
Activation:
Select On or Off .
Time:
Enter the wake-up time in 4-digit format.
Melody:
Select melody.
Volume:
Set the volume (1–6).
§Save§ Press the display key to save the setting.
The ì icon is displayed in the idle display.
A wake-up call with the selected ringer melody is signalled on the handset. The wake-up
call sounds for 60 seconds. ì is shown in the display. If no key is pressed, the wake-up call
is repeated twice at five minute intervals and then turned off.
During a call, the wake-up call is signalled by a short tone.
Please note:
You can also adjust the ringer tones via Ð Settings
£
Audio Settings
£
Advisory Tones in the menu.