Siemens GIGASET C475 IP - Manual (Page 124)

123
Operating the base station on the PABX
Changing the dialling mode
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Operating the base station on the PABX
The following settings are only necessary when your PABX requires them; see the PABX
user guide. The settings only concern fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling Line Iden-
tification.
Changing the dialling mode
You can set the dialling mode.
v
¢
Ð Settings
¢
Telephony
¢
Fixed Line
¢
Dialling Mode
Tone / Pulse Select and press §OK§ ( = on).
a Press and hold (idle status).
Setting recall
You can set the recall option.
v
¢
Ð Settings
¢
Telephony
¢
Fixed Line
¢
Recall
q Select recall and press §OK§ .
The current setting is indicated by .
a Press
and hold (idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending
the phone number.
v 5 5 O
L
~
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press §OK§ .
Please note:
– Suffix dialling (for selecting the connection) is not possible in conjunction with pulse dialling:
a hash "#" is displayed during dialling but ignored when pulse dialling is used.
– Enter an asterisk "*" to switch temporarily to tone dialling. The asterisk is not displayed.
‰
‰