Siemens GIGASET C475 IP - Manual (Page 20)

19
First steps
Making settings for VoIP telephony
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / starting.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Starting the connection assistant
Precondition: The base station is connected to the mains power supply and a router. Your
router is connected to the Internet (page 17).
Tip: Leave
VoIP activated as the default connection for your telephone (default setting,
page 117). The telephone then attempts to establish a connection directly to your VoIP pro-
vider's server after the connection assistant is closed. If incorrect/incomplete information
means that the connection cannot be established, messages will be displayed (page 22).
As soon as the handset battery is sufficiently charged, the message key f on the handset
will flash (approx. 20 minutes after you have put the handset in the charging cradle). Press
the message key f to start the connection assistant.
You will see the following display:
§Yes§ Press the display key to start the connection assistant.
~ Enter the system PIN (default is 0000) and press §OK§ .
If you press §No§ , the procedure that follows is described under "Entering your name in the
Gigaset.net directory" on page 21.
Please note:
Your phone is preconfigured for dynamic assignment of the IP address. In order for your router to "rec-
ognise" the phone, dynamic IP address assignment must also be activated on the router, i.e. the
router's DHCP server is activated. Turn to page 121 to find out how to assign your phone a static IP
address if necessary.
Please note:
The connection assistant will also start automatically if you try to establish a connection via the Inter-
net before you have made the necessary settings.
You can also call up the connection assistant at any time via the menu (page 119).
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes