Checking the base station mac address – Siemens GIGASET C475 IP User Manual
Page 123
122
Making VoIP settings
Activating/deactivating display of VoIP status messages
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
DNS Server:
For
IP Address Type
=
Static
:
Enter the IP address for the preferred DNS server. The DNS server (Domain Name Sys-
tem) converts the symbolic name of a server (DNS name) into the public IP address for
the server when the connection is made.
You can specify your router's IP address here. The router forwards phone address
requests to its DNS server.
192.168.2.1 has been preset.
Default Gateway:
For
IP Address Type
=
Static
:
Enter the IP address for the standard gateway, by means of which the local network is
connected with the Internet. This is generally the local (private) IP address for your
router (e.g. 192.168.2.1). Your phone requires this information to be able to access the
Internet.
192.168.2.1 has been preset.
¤
Click
§Save§
to save the settings.
Activating/deactivating display of VoIP status messages
If the function is activated, a VoIP status code for your service provider is displayed.
Activate the function if, for example, you have problems with VoIP connections. You will
receive a provider-specific status code, which supports the service when the problem is
analysed. You will find a table with the possible status screens in the appendix (page 167).
v
¢
Ð
Settings
¢
Telephony
¢
VoIP
~
Enter the system PIN and press
§OK§
.
Show Stat. on HS
Select and press
§OK§
(
= on).
Checking the base station MAC address
Depending on your network configuration, you may have to enter your base station MAC
address, for example, into your router's access control list. You can check your base station
MAC address:
v 5 5 O 2 Q
The base station MAC address is displayed.
a
Press and hold (idle status).
Please note:
You can find notes on the IP address and the subnet mask on page 131 and in the glossary on
Please note:
For how to make the setting on the Web configurator, see page 162.
‰