Siemens GIGASET C475 IP - Manual (Page 98)

97
Using the network mailbox
Configuring the (network) mailbox for fast access
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 18.12.07
Ve
rs
ion 2.
1,
08.0
1.20
07
Configuring the (network) mailbox for fast access
You can use fast access to make direct calls to a network mailbox or the Gigaset C475 IP's
integrated answer machine.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different answer machine
to key
on each registered handset.
No answer machine is preconfigured for fast access in the default settings.
Fast access is not yet set on the handset: Press and hold the key
.
Or:
v
¢
Ð Settings
¢
Voice Mail
¢
Set Key 1
The list of connections (VoIP and fixed line network) that are assigned to the handset as
receive numbers is displayed. The display shows Net AM: xxx , where xxx is replaced by the
relevant default name for the connection ( IP1 to IP6 , Fxd. line ) and (if available) Local AM for
the integrated answer machine on the Gigaset C475 IP base station.
s
Select connection and press §OK§ ( = on).
If a number is already saved to the base station for the selected network mailbox, fast
access is activated.
a Press
and hold (idle status).
If no number has been saved for the network mailbox a message is displayed to this effect.
You will be prompted to enter the number for the network mailbox.
s Jump
to the Number line.
~ Enter the number for the network mailbox.
§Save§ Press the display key.
a Press and hold (idle status).
Fast access is automatically activated.
Please note:
For information on how to activate and deactivate network mailboxes via the web configurator and
to change their assigned numbers, see, see page 151.
Please note:
You can only assign fast access to one answer machine.
However, you can also call the network mailbox assigned to a handset's receive numbers directly via
the message key (page 98).
‰