Sterling Trucks Acterra MX - Manual (Page 20)

Maintenance Operation Sets for Groups 00 through 83
REQUIRED MAINTENANCE OPERATION SET IM M1 M2 M3 M4 M5
Maintenance Operation Number and Operation Description
42–23 Bosch Rail-Slide Hydraulic Brake Caliper Lubricating • • • •
42–24 Brake Inspection • • • • • •
46–01 Steering Driveline Lubricating • • • •
46–02 Drag Link Lubricating • • • • • •
46–03 Power Steering Reservoir Fluid Level Checking • • • •
46–04 Power Steering Reservoir Fluid and Filter Changing • •
46–05 Power Steering Gear Lubricating • • • • • •
47–01 Fuel Tank Draining and Vent Checking • • •
49–01 Exhaust System Inspecting • • • •
54–01 Electrical System Checking • • •
54–02 Coolant Level Sensor Cleaning •
72–01 Weatherstrip, Door Latch, and Door Hinge Lubricating • • • • • •
83–01 Air Conditioner Inspecting • • • • • •
83–02 HVAC Air Filter Replacing ‡
* With frequent use, the Pacbrake Exhaust Brake will operate free of maintenance. However, if the vehicle is used inconsistently, seasonally, or is exposed to
excess moisture, it will be necessary to perform preventative maintenance as instructed in Maintenance Operation 01–03 .
† IM interval does not apply to vehicles with a factory fill of Eaton approved synthetic lubricant.
‡ Replace the HVAC filter every 6 months regardless of mileage.
Table 9, Maintenance Operation Sets for Groups 00 through 83
General Information
00
Maintenance Operation Sets Table: 00–08
Acterra Maintenance Manual, October 2008 00/13