Samsung DCS KEYSET - Manual (Page 20)

– 11 –
Outside Calls
Making An Outside Call
1. Lift the handset and press an idle outside line key, line group key
or dial a line access code to receive dial tone.
OR
To use the speakerphone, press an idle outside line key or line
group key, or dial a line access code, to receive dial tone through
the speaker.
OR
Press the
SPEAKER
key, receive internal dial tone and dial a line
access code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the
ANS/RLS
key.
Note: You will receive No More Calls tone when you attempt to make a call and
there is no key available for that line.
•••• If Least Cost Routing (LCR) is enabled on your phone system,
there may be a key labelled
LCR
or it may be selected by dialling
the access code (e.g. ‘9’) which is set during system installation.
•••• If your system is programmed to require an authorisation code
before you can make a call, dial * plus a valid code before select-
ing a C.O. line.
•••• If your system is programmed to require an account code before
you can make a call, press the
ACCT
key, or dial 47, followed by a
valid account code. Press the
ACCT
key or the
ACCT
soft key and
then select a
C.O
line.
For more information on authorisation and account codes, see your
system administrator.