Samsung DCS KEYSET - Manual (Page 53)

Samsung DCS Keyset User Guide
– 44 –
Note: Depending on speaker volume and the acoustics of your office, it may be
advisable to turn the group listening feature off before hanging up. This will elimi-
nate any momentary squeal.
Account Codes
When equipped with optional equipment, your Samsung DCS system
allows calls to be charged to a specific account. You must have an
ACCT
key programmed on your keyset to use this feature.
•••• During any outside call, press the
ACCT
key.
•••• Enter the account code (maximum 12 characters). Press the
ACCT
key again. Your conversation will not be interrupted.
Note: If you make an error before you complete the account code, press the
ACCT
key twice and redial the correct code
Locking Your Keyset
Using this option, you can allow or disallow incoming and outgoing
calls from your keyset while absent from your desk. There are three
possible options: Unlocked, Locked All and Locked Out.
Unlocked
Keyset can be used without restriction.
Locked All Prevents keyset from making or receiving calls.
Locked Out Restricts the keyset from accessing an outside line and
making a call. Calls can be received.
1. While on-hook, press the
TRSF
key and dial 100.
2. Dial your 4-digit extension passcode.
3. Dial 1 to set the keyset to Locked Out
OR
Dial 2 to set the keyset to Locked All.
4. Press the
TRSF
key to store your selection.