Samsung DCS KEYSET - Manual (Page 63)

Samsung DCS Keyset User Guide
– 54 –
5. Press the
DIR
key or the
DIAL
soft key to dial the number.
Display Number Dialled
Display keysets show digits as they are dialled. They will stay in the
display until the call duration timer comes on automatically or the
TIMER
key is pressed (see below). If the call duration timer is not
used, the number dialled is displayed until the call is released, trans-
ferred or put on hold.
Call Duration Timer
The system can be set to time outside calls automatically. A few sec-
onds after you dial a telephone number, the timer will appear in the
display. (It appears immediately for incoming calls.) See Auto Timer,
below.
To manually begin timing a call, you can use the Timer function. See
Timer Function, below
Auto Timer
You can have the timer automatically start when you answer incom-
ing calls, or after a short delay on an outgoing call.
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 11 to turn the auto timer on or 10 to turn it off.
3. Press the
TRSF
key to store your selection.
The call timer displays in minutes and seconds for the duration of the
call. If a call lasts longer than 99 minutes, the timer restarts.
Timer Function
You can manually time your calls or use this feature as a simple stop-
watch.