Samsung DCS KEYSET - Manual (Page 48)

– 39 –
To set a message:
•••• Dial 48 followed by a message code 01–20.
To cancel this message:
•••• Dial 48 followed by 00.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER key before you begin dialling.
You may also have several programmed message (
PMSG
) keys, each
with a different message code. If so:
•••• Press any
PMSG
key. The message is set and the key will light
red. Press the key again to turn the light off.
•••• Pressing another
PMSG
key will turn the previous one off and set
a new message.