Samsung DCS KEYSET - Manual (Page 40)

– 31 –
Chain Dialling
You can manually dial additional digits following a speed dial num-
ber or chain as many speed dial numbers together as required.
• After the first speed dial number is answered, press the
SPD
key
again and dial another speed number
OR
manually dial additional
digits following a speed dial number.
Automatic Redial/Retry
When you are making an outside call and you receive a busy signal,
the system can automatically redial the number for you. It will auto-
matically redial at a pre-programmed interval for up to 15 attempts.
You must have a
RETRY
key programmed to use this feature.
•••• When you hear a busy signal, press the
RETRY
key.
The system will reserve the line and automatically redial the same
number for you. You will hear the call being made through the keyset
speaker.
•••• When the called party answers, you can begin speaking.
Note:
• If you make another call, auto-redial is cancelled.
• To cancel a retry, lift and replace the handset.
Pulse To Tone Changeover
When making an outside call on a dial pulse line, press #. All digits
dialled after the # will be sent as tones.