Samsung DCS KEYSET - Manual (Page 67)

Samsung DCS Keyset User Guide
– 58 –
Calling Line Identification Presentation
(CLIP)
CLIP is information that can be displayed when a call is received at
your keyset, normally the caller’s name or number.
Note: CLIP is supported by 408i systems but not 408 systems.
Selecting Your CLIP Display
You can decide if you want to see the name or number in the display,
or no
CLIP
display. Regardless of which one is selected, you can use
the
NND
function to view the remaining
CLIP
information. To select
the type of
CLIP
information you wish to view first:
1. While on-hook, press the
TRSF
key and dial 119.
2. Dial 0 if you do not wish to view
CLIP
information, or 1 to view
the
NUMBER
first, or 2 to view the
NAME
first.
3. Press the
TRSF
key to store your selection.
Viewing the Next CLIP Call
In the event that you have a call waiting or a camped-on call at your
keyset, you can display
CLIP
information associated with the call. Ei-
ther the
CLIP
name or number will show in the display depending on
your
CLIP
display selection (see above).
To view
CLIP
information for calls in queue at your keyset, press the
NEXT
key. If your keyset does not have a
NEXT
key, press the
SCROLL
key and select
NEXT
from the
CLIP
menu.
Saving the CLIP Number
At any time during an incoming call that provides
CLIP
information,
you can press the
SAVE
key to save the
CLIP
number. If your keyset
does not have a
SAVE
key, press the
SCROLL
key and select
SAVE
from the
CLIP
menu.