Samsung DCS KEYSET - Manual (Page 21)

Samsung DCS Keyset User Guide
– 12 –
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before dialling.
Answering An Outside Call
•••• Lift the handset and you are automatically connected to the ring-
ing call. (See Ring Preference under Customising Your Keyset.)
OR
Press the
ANS/RLS
key to automatically answer on the speaker-
phone.
Note: If a call is flashing at your keyset but not ringing, you must press the flashing
key to answer.
Universal Answer Device
Outside lines can ring over the paging system or to a loud ringer. To
answer calls ringing in night service to this device, dial 67 or press
the
UA
key.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before dialling.
Recall Dial Tone
•••• Press the
NEW
key to disconnect your existing call, wait for dial
tone and then make a new call on the same line.
Note: If the
NEW
key does not appear on your keyset, the
RECALL
key may be pro-
grammed to recall dial tone.
Sending a Flash
While on an outside call, press the programmed
FLASH
key to send a
flash to the telephone company. This is required for some custom
calling features or
CENTREX
use (e.g. for nuisance calls).