Samsung DCS KEYSET - Manual (Page 31)

Samsung DCS Keyset User Guide
– 22 –
Conference Calls
You may connect up to five parties (you and four others) in a confer-
ence call, in any combination of outside lines and internal extensions
in any order.
1. While engaged in a conversation, press the
CONF
key (if as-
signed), or the
CONF
soft key, or press the
TRSF
key and dial 46.
You receive conference tone.
2. Make another call (internal or outside) and press the
CONF
key,
or the
CONF
soft key, or the
TRSF
key and receive conference
tone.
3. Make another call or press the
CONF
key, or the
CONF
soft key, or
the
TRSF
key to join all parties.
4. Repeat step 3 until all parties are added.
Note: When attempting to add another party to the conference and you are not able
to reach the desired person, hang up. Press the
CONF
key again to return to your
previous conversation.
To drop a party from your conference call:
1. Press the
CONF
key or the
CONF
soft key and dial the extension or
line number that is to be dropped.
2. Press the
CONF
key or the
CONF
soft key again to re-establish the
conference without the dropped number.
Leaving a Conference
To leave a conference, hang up. Control is passed to the next internal
extension. If there are no internal extensions and you wish to leave
outside lines connected together in a trunk to trunk conference, press
the
CONF
key then the
CALL
key that the call appears on, or follow
the instructions to drop a party (above) using your extension number.
When outside callers hang up, the lines will release automatically.
Press the
CONF
key to rejoin a trunk to trunk conference.