Sanyo POA-PN03C - Manual (Page 18)

1
Chapter 2 Installation
Mounting
✐ AC cord must be disconnected when mounting or removing this product otherwise it may dam-
age the product.
✐ Do not install multiple network units into a projector otherwise it may damage the product.
✐ Connect the AC cord after connecting the LAN cable and computer.
[2] Installation and network configuration
Caution
!
1
Disconnect the AC plug from the projector.
2
Remove the connector cover and
screw covers (2 pieces) from the pro-
jector and insert plug on this prod-
uct to the option connector.
3
Tighten two screws by using a coin
etc.
Connector cover
Screw cover