Sanyo POA-PN03C - Manual (Page 42)


Chapter 3 Basic Setting and Operation
✐
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private
MIB information, refer to file "Mibinfo/10PjNetPlus2.mib" in the CD-ROM.
SNMP setting
This product provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read only) and Set (read-
write). This product allows to use Refer (read only) only. The SNMP message informs the pro-
jector status called "Trap" to an administrator. Click SNMP setting on the main menu and set
up each item.
Item Description
Contact .................. Enter user name of the projector etc. (optional)
Place ........................Enter place of the projector (optional)
Community
name(refer) ........ Enter community name (read only). Default name
is "public".
PJ information