Sanyo POA-PN03C - Manual (Page 98)


Chapter 6 Network Viewer
Select input mode to "Network" previously.
1
Access to the control page on the projector by using the web browser.
From the main menu, click Network - Viewer to display the setting page.
Using the Network Viewer function
The Network Viewer is a function to acquire the JPEG image data from the file servers
placed in the network and project them on the screen. The projected image data are
specified with the folder unit. You can set the display period and repeating times, and also
you can register those folders as the program.
*The network viewer function cannot be
used when using the network capture function.
Condition to use the Network Viewer function:
* Enables to use the FTP service with Windows 2000 Professional or XP Professional.
* User must have a full-access account to the FTP server or the FTP server allows anyone to
use with "Anonymous" account which also has a full-access mode.
* The allowed number of simultaneous access from the same IP address is more than 20.
PC4 PC3 PC6
PC5
PC1 PC2
FTP file server
JPEG
Prog.
JPEG
PJ2 PJ1
Project JPEG
images stored in
PC3 with PC2
[1] Control by the web browser
To use this function, it is necessary to disable "pop-up block" function of the web
browser.