Sanyo POA-PN03C - Manual (Page 73)

7
PJ-NET ORGANIZER
OWNER'S MANUAL [XP100 Series]
ENGLISH
[1] Control by the computer
PC1
PC4 PC3 PC6
Capture
PC5
PC2 PC2 Project this screen
image with PJ2.
* PC provides the Network Capture.
PJ2 PJ1
Select input mode to "Network" previously.
1
Click Network Capture 3 icon on the task bar.
2
Click Start real time capture on the popup menu.
The screen image of the computer will appear on the
projected screen in real time.
• To stop capturing, click Stop real time capture on
the popup menu. The captured image of the com-
puter on the screen is frozen.
• To restart capturing, click Restart real time capture
on the popup menu.
3
To end capturing, click End real time capture on the
popup menu.
* Start capturing from
the PC1.
Icon on the task bar
Standby Capturing
If the Network PIN code set on the projector dif-
fers from PIN code set on the parameter setting
up, The Pin code setting window appears. Enter a
correct PIN code and click Ok button.
✐
If the error message appears, check item "Parameter set up" (+ p.71).
Using the Real Time Capture