Sanyo POA-PN03C - Manual (Page 93)


PJ-NET ORGANIZER
OWNER'S MANUAL [XP100 Series]
ENGLISH
Creating a program file [Program Editor]
Network Viewer 3 (Program Editor) is a tool to make a program file which specifies the dis-
play order of the image and its file path in the file server (FTP server). The Program Editor
makes a folder "DispParam" at the login root directory in the FTP server and makes files as
each program name into this folder. These files are called "Program". By specifying the pro-
gram file with the Network Viewer function, you can have the programmed display with
the projector .
Procedure of making program
1
To launch the Program Editor, click "Network Viewer 3
(Program Editor)" menu from "Start" - "All Programs" -
"Network Viewer & Capture 3" menu.
2
Click Connect button.
3
If the connection setting window appears, enter the each
item and then click Ok button.
The setting window disappears and then the programs
are listed on the window if there are program files at
the login directory in the connected FTP server.
IMPORTANT
It is required to set the write permission mode for the login directory of the FTP server.
If only the read only mode, you will have an error when you register a new program.
Creating a program file [Program Editor]
Item Description
Host name ............Enter the FTP server name or IP address
Root Folder ................. Specify the root directory of the FTP server. Normally use "/".
User ID .................... Enter your login account of the FTP sever or use blank when you login as anonymous
account for the FTP server
Password ............... Enter your password (PIN code) or use blank when you login as anonymous account.