Sanyo POA-PN03C - Manual (Page 39)


PJ-NET ORGANIZER
OWNER'S MANUAL [XP100 Series]
ENGLISH
E-mail setting
2
Registering and deleting E-mail addresses
Click "Add e-mail address" and type the e-mail address
onto the text box and click Set button. To check the
registered addresses, click Check/Delete sub menu tab.
The addresses are listed as the figure on the right.
✐ Up to 10 E-mail addresses can be registered.
To delete the registered addresses, check the address you
want to delete and click Delete button.
3
Option selection for sending alert mail
Click Option sub menu tab. Check the condition items
under which alert mail will be sent and click Set button.
Please refer to item "Examples :Type and contents of alert
mail" described on the next page.
Check / Delete
Option
[1]––––––––––––––––––––––––––––––––––
o
When PJ lamp is off.
o When PJ lamp replace time is reached.
o When internal PJ power circuit is failed.
o When internal PJ temperature is too high.
o When PJ is turned into Standby in proper user opera-
tion.
[2]––––––––––––––––––––––––––––––––––
o
When Power management function turns PJ lamp
off.
o When the signal is interrupted.
o When Auto Play is failed.
[3]––––––––––––––––––––––––––––––––––
o
When accumulated filter use time
reaches [ ] hours.
o Filter Warning
[4]––––––––––––––––––––––––––––––––––
o
When lamp Corres. Value reaches
[ ] hours.
Attached message
✐
If condition "When Auto Play is failed" is
checked, the trap is sent when occurring the
error during the auto display operation using
with the network viewer function (+p.98).
For further information of the error, refer to
item "Auto Display setting and control page
[3]"((+p.101).
✐
The length of message should be less than 256
characters.
✐
Up to 99,999 hours can be set for use time.