Sanyo POA-PN03C - Manual (Page 56)


Chapter 4 Controlling the Projector
Save the controls and settings
This page is to save and load the controls and settings of the projector in
the block. The storable items are "PC adjustment", "Control" and "Setting".
Save the controls and settings
Store/free the settings
1
Click Save menu on the main menu.
2
Select a set number (Totalsave1 to Totalsave10) you intend to store current settings with
the pull-down menu button of the item Store & Free. Name this set number onto the
Memo text area.
* Up to 18 characters can be used for the Memo.
3
Click Store button to store the current setting and
name into the selected set number.
To remove the saved setting, select the set number
with pull-down menu button and then click Free
button.
Select a set
number
Type a memo for
the selected set
number
✐
You can store up to 10 (Totalsave1 to Totalsave10) sets of settings into the network unit. Totalsave1
to Totalsave10 are indicated on the item "Current mode" of the PC adjustment (+p.52) as the
EXT51 to EXT60.