Sanyo POA-PN03C - Manual (Page 55)


PJ-NET ORGANIZER
OWNER'S MANUAL [XP100 Series]
ENGLISH
Item Description
Remote control ..... Sets the remote control code. (Code 1 - Code 8)
Fan speed control ........ Sets the fan control speed. (Normal, Max)
Status ...............Indicates the current fan mode.
Factory default .......... Sets all of the projector control items to the fac-
tory default setting except the following items.
Lamp Corres. Value, PJ time, PIN code, Filter used
time, Scrolls remaining times.
* This function is not effective for the settings
of the network unit (Network address settings,
e-mail settings, etc.)
PJ lock suspend ............. When the projector has a security of PIN code
lock, disable this function temporarily by pressing
Execute button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet
and then connect AC cord again.
2. Access this page with the web browser,
3. Click Execute button on the PJ lock suspend.
* This function is disabled after the projector turns on.
Item Description
Lamp control* ... Selects lamp control mode. (Auto, Normal, Eco1,
Eco2) This function may be disabled depending
on the projectors.
Lamp
Corres. Value(h) Displays the lamp use time (Corresponding
value) . Reset the time after lamp replacement.
Lamp Corres. Value Reset
1. Select a Lamp-1 radio button and then click Reset button.
2. Click Ok button to execute the reset.