SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 146)

U
SER
A
UTHENTICATION
6-8
• The following web browsers and operating systems currently support
HTTPS:
• To specify a secure-site certificate, see “Replacing the Default Secure-site
Certificate” on page 6-9.
Command Attributes
• HTTPS Status – Allows you to enable/disable the HTTPS server
feature on the switch. (Default: Enabled)
• Change HTTPS Port Number – Specifies the UDP port number used
for HTTPS/SSL connection to the switch’s web interface. (Default: Port
443)
Web – Click Security, HTTPS Settings. Enable HTTPS and specify the
port number, then click Apply.
Figure 6-3 HTTPS Settings
CLI – This example enables the HTTP secure server and modifies the port
number.
Table 6-1 HTTPS System Support
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Netscape Navigator 6.2 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
Console(config)#ip http secure-server 21-17
Console(config)#ip http secure-port 441 21-18
Console(config)#