SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 511)

DHCP S
NOOPING
C
OMMANDS
22-17
Related Commands
ip dhcp snooping (22-11)
ip dhcp snooping vlan (22-13)
ip dhcp snooping trust (22-17)
ip dhcp snooping database flash
This command writes all dynamically learned snooping entries to flash
memory.
Command Mode
Global Configuration
Command Usage
This command can be used to store the currently learned dynamic
DHCP snooping entries to flash memory. These entries will be restored
to the snooping table when the switch is reset. However, note that the
lease time shown for a dynamic entry that has been restored from flash
memory will no longer be valid.
Example
ip dhcp snooping trust
This command configures the specified interface as trusted. Use the no
form to restore the default setting.
Syntax
[no] ip dhcp snooping trust
Default Setting
All interfaces are untrusted
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#ip dhcp snooping database flash
Console(config)#