SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 557)

SHOW INTERFACES SWITCHPORT
24-17
Table 24-2 show interfaces switchport - display description
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 24-10).
Muilticast Threshold Shows if multicast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 24-10).
LACP status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 25-4).
Ingress/Egress rate
limit Shows if rate limiting is enabled, and the current rate limit
(page 27-2).
VLAN membership
mode Indicates membership mode as Trunk or Hybrid
(page 30-10).
Ingress rule Shows if ingress filtering is enabled or disabled
(page 30-12).
Acceptable frame
type Shows if acceptable VLAN frames include all types or
tagged frames only (page 30-11).
Native VLAN Indicates the default Port VLAN ID (page 30-13).
Priority for untagged
traffic Indicates the default priority for untagged frames
(page 31-4).
GVRP status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 30-4).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 30-14).
Forbidden VLAN Shows the VLANs this interface can not dynamically join
via GVRP (page 30-15).
Unknown multicast
block Shows if the unknown multicast packets are blocked
(page 24-11).
Unknown unicast
block Shows if the unknown unicast packets are blocked
(page 24-11).