SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 332)

M
ULTICAST
F
ILTERING
15-16
• MVR Status – Shows the MVR status. MVR status for source ports is
“ACTIVE” if MVR is globally enabled on the switch. MVR status for
receiver ports is “ACTIVE” only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
• Immediate Leave – Shows if immediate leave is enabled or disabled.
• Trunk Member
20 – Shows if port is a trunk member.
Web – Click MVR, Port Information or Trunk Information.
Figure 15-7 MVR Port Information
CLI – This example shows information about interfaces attached to the
MVR VLAN.
20. Port Information only.
Console#show mvr interface 33-19
Port Type Status Immediate Leave
------- -------- ------------- ---------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
Console#