SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 274)

VLAN C
ONFIGURATION
12-16
belonging to the port’s default VLAN (i.e., associated with the PVID)
are also transmitted as tagged frames.
- Hybrid – Specifies a hybrid VLAN interface. The port may transmit
tagged or untagged frames.
- Dot1q-Tunnel – Configures IEEE 802.1Q tunneling (QinQ) to
segregate and preserve customer VLAN IDs for traffic crossing the
service provider network. See “Configuring IEEE 802.1Q
Tunneling” on page 12-17 for a detailed description of this feature.
• TPID (0-65535) – Tag Protocol Identifier specifies the ether-type of
incoming packets on a tunnel port. See “Configuring IEEE 802.1Q
Tunneling” on page 12-17 for a detailed description of this parameter.
• Trunk Member – Indicates if a port is a member of a trunk. To add a
trunk to the selected VLAN, use the last table on the VLAN Static Table
page.
Web – Click VLAN, 802.1Q VLAN, Port Configuration or Trunk
Configuration. Fill in the required settings for each interface, click Apply.
Figure 12-7 VLAN Port Configuration