SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 387)

F
ILE
M
ANAGEMENT
C
OMMANDS
19-17
or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,
“.”, “-”, “_”)
• Due to the size limit of the flash memory, the switch supports only
two operation code files.
• The maximum number of user-defined configuration files depends on
available memory.
• You can use “Factory_Default_Config.cfg” as the source to copy
from the factory default configuration file, but you cannot use it as the
destination.
• To replace the startup configuration, you must use startup-config as
the destination.
• The Boot ROM and Loader cannot be uploaded or downloaded from
the TFTP server. You must follow the instructions in the release notes
for new firmware, or contact your distributor for help.
• For information on specifying an https-certificate, see “Replacing the
Default Secure-site Certificate” on page 6-9. For information on
configuring the switch to use HTTPS for a secure connection, see “ip
http secure-server” on page 21-17.
Example
The following example shows how to download new firmware from a
TFTP server:
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: V1.0.0.6.BIX
Destination file name: V1006
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#