SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 72)

C
ONFIGURING THE
S
WITCH
3-10
Priority 13-1
Default Port Priority Sets the default priority for each port 13-1
Default Trunk Priority Sets the default priority for each trunk 13-1
Traffic Classes Maps IEEE 802.1p priority tags to output queues 13-3
Traffic Classes Status Enables/disables traffic class priorities (not
implemented) NA
Queue Mode Sets queue mode to strict priority or Weighted
Round-Robin 13-6
Queue Scheduling Configures Weighted Round Robin queueing 13-7
IP Precedence/
DSCP Priority Status
Globally selects IP Precedence or DSCP Priority, or
disables both. 13-8
IP Precedence Priority Sets IP Type of Service priority, mapping the
precedence tag to a class-of-service value 13-10
IP DSCP Priority Sets IP Differentiated Services Code Point priority,
mapping a DSCP tag to a class-of-service value 13-12
IP Port Priority Status Globally enables or disables IP Port Priority 13-14
IP Port Priority Sets TCP/UDP port priority, defining the socket
number and associated class-of-service value 13-10
QoS 14-1
DiffServ Configure QoS classification criteria and service
policies 14-2
Class Map Creates a class map for a type of traffic 14-3
Policy Map Creates a policy map for multiple interfaces 14-6
Service Policy Applies a policy map defined to an ingress port 14-10
IGMP Snooping 15-2
IGMP Configuration Enables multicast filtering; configures parameters for
multicast query 15-4
Multicast Router
Port Information
Displays the ports that are attached to a neighboring
multicast router for each VLAN ID 15-7
Table 3-2 Switch Main Menu (Continued)
Menu Description Page